2
3.2.5 Exhaust System 34
3.3 LUBRICATION SYSTEM 34
3.3.1 Checking Sump Oil 34
3.3.2 Changing Engine Oil 35
3.3.3 Changing Oil Filter Cartridge 35
3.3.4 Oil Specification 35
3.3.5 Oil Capacities 35
3.4 COOLING SYSTEM 35
3.4.1 Intended Engine Operating Temperature 35
3.4.2 Engine Coolant 35
3.4.3 Water 36
3.4.4 Coolant Capacities 36
3.4.5 Coolant Inhibitors 36
3.4.6 Procedure for Filling Engine 37
3.4.7 Providing Adequate Raw Water Supply to the Engine Heat Exchanger 37
3.4.7.1 Raw Water Supply 37
3.4.7.2 Cooling Loop 37
3.4.7.3 Setting Raw Water Flow Rate 39
3.4.7.4 Raw Water Outlet 39
3.4.7.5 Raw Water Quality Strainers and Deterioration of Heat Exchanger (CAC) 39
3.4.7.6 Backflow Preventers 40
3.4.7.7 Raw Water Outlet Temperature 40
3.4.8 Flow Paths of Engine Cooling System 40
3.4.9 Important Service Notice 42
3.4.9.1 Water Pump Cavitation 42
3.5 ELECTRICAL SYSTEM 42
3.5.1 Wiring Diagrams 42
3.5.2 Checking Drive Belt Tension and Adjustment 42
3.5.3 Engine Overspeed 42
3.5.4 Field Simulation of Pump Controller Alarms 43
3.5.5 Battery Requirements 43
3.6 ENGINE SPEED ADJUSTMENT 43
4.0 MAINTENANCE SCHEDULE 44
4.1 ROUTINE MAINTENANCE 44
5.0 TROUBLE SHOOTING 44
5.1 DIAGNOSTIC TROUBLE CODES 45
6.0 PARTS INFORMATION 46
6.1 SPARE PARTS 46
6.2 ENGINE MAINTENANCE PARTS LIST 46
7.0 OWNER ASSISTANCE 46
To Next Page
Loading...
Need help?
General
