2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Thank you for purchasing this CLARKE product.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
IN THE BOX
The following should be supplied inside the box.
If any parts are missing, please contact your local Clarke dealer.
• 1 x Belt disc sander
• 1 x 200mm P80 sanding disc (Fitted)
• 1 x 100mm x 914mm 4"x 36" Sanding belt (Fitted)
• 1 x Disc table 265x150
• 1 x Belt table 170 x 125
• 1 x Dust bag
•1 x Wrench
• 1 x Angle Gauge
• 1 x Instruction manual
To Next Page
Loading...
Need help?
General
