3. Unpacking the
Warewasher
After unpacking your warewasher, check it for any transport
damage. Never install and use a damaged warewasher. If your
warewasher is damaged contact your retailer immediately.
Make sure the water and electricity connections of your
warewasher comply with the specifications given in this Manual.
Remove all outer packaging and the protective film from your
warewasher before positioning it.
Remove any accessories shipped inside the warewasher and
unpack them carefully.
Ensure all packaging materials are disposed of in accordance with
local and national regulations.
3.1 Accessories Supplied
The warewasher is supplied with the following accessories (Note
1):
Notes:
1. Images are for reference only, actual parts supplied
may differ.
2. Differs depending on drain type.
3. Fitted to warewashers with a Water Softener only.