07610-004-64-85-A
12
INSTRUCTIONS
OPERATION
SHUTDOWN &
CLEANING
5. Verify the wash arms are not clogged. If so, clean nozzles with a brush and flush
with fresh water.
6. Remove strainers.
7. Rinse strainers with water and wipe-out with a rag. Use a toothpick to dislodge any
stubborn debris.
8. Spray or wipe-out interior of machine. Ensure all debris is removed from tub
bottom.
9. Replace the strainers and ensure they are correctly seated.
10. Replace wash arms, rinse arms, and standpipe.
11. After cleaning is complete, stainless steel polish can be used to clean and
protect the outside of the machine.
Nozzles
To Next Page
Loading...
