07610-004-64-85-A
14
Detergent usage and water hardness are two factors that contribute greatly to how
eciently this machine will operate. Using detergent in the proper amount can
become a source of substantial savings. A qualied water treatment specialist can
determine what is needed for maximum eciency from the detergent.
1. Hard water greatly aects the performance of the machine, causing the amount
of detergent required for washing to increase. If the machine is installed in an
area with hard water, the manufacturer recommends the installation of water
treatment equipment.
2. Deposited solids from hard water can cause spotting that will not be removed
with a drying agent. Treated water will reduce this occurence.
3. Treated water may not be suitable for use in other areas of operation and it
could be necessary to install a water treatment unit for the water going to the
machine only. Discuss this option with a qualied water treatment specialist.
4. Operators should be properly trained on how much detergent to use per cycle.
Meet with a water treatment specialist and chemical supplier to discuss a
complete training program for operators.
5. This machine requires that chemicals be provided for proper operation and
sanitization. Contact a chemical supplier with any questions.
6. Water temperature is an important factor in ensuring the machine functions
properly, and the machine's data plate details what the minimum temperatures
must be for the incoming water supply, the wash tank, and the rinse tank. If
minimum requirements are not met, there is a possibility that dishes will not be
clean or sanitized.
7. Instruct operators to observe the required temperatures and to report when they
fall below the minimum allowed. A loss of temperature can indicate a larger
problem.
DETERGENT
CONTROL
i
INSTRUCTIONS
OPERATION
To Next Page
Loading...
