Cleanware HT-E - Page 23

17
07610-004-64-85-A
TROUBLESHOOTING
TROUBLESHOOTING
WARNING! Inspection, testing, and repair of electrical equipment should only be performed by a
qualied service technician. Many of the tests require that the machine have power to it and live
electrical components be exposed. USE EXTREME CAUTION WHEN TESTING THE MACHINE.
!
WARNING
OBSERVATION POSSIBLE CAUSE REMEDY
F. Rinse temperature
inadequate.
1. Water pressure above requirement.
2. Heating element damaged.
3. Heating element encrusted with lime
deposits.
4. Safety thermostat activated.
1. Adjust water pressure to meet requirement.
2. Contact qualied service agency.
3. Perform deliming operation.
4. Press reset button.
G. Wash temperature
inadequate.
1. Safety thermostat activated.
2. Heating element damaged.
3. Heating element encrusted with lime
deposits.
1. Press reset button.
2. Contact qualied service agency.
3. Perform deliming operation.
H. Rinse light not
illuminating.
1. Rinse light damaged. 1. Contact qualied service agency.
I. Rinse light remains
illuminated.
1. See Problem E. 1. See Problem E.
J. Wash light not
illuminating.
1. Wash light damaged. 1. Contact qualied service agency.
K. Rinse light
remains
illuminated.
1. See Problem F. 1. See Problem F.
L. Machine continues
to operate with
door open.
1. Microdoor damaged.
2. Microdoor out of line with magnetic eld.
1. Contact qualied service agency.
2. Contact qualied service agency.
M. Machine not
draining.
1. Drain pump clogged. 1. See Drain Pump Cleanout on previous page.