Clear-Com Communication Systems
Encore System Installation Instruction Manual
1-22
Program Input jack, the Program Level controls on the Main Station
have no effect.
Channel B is connected to a Talent Receiver for Talent or an
Announcer. Program feed audio from the studio feed can be heard by
the Director and Engineer, as well as the Talent or Announcer. The
Call on Talk B and Momentary Talk B options switches on the Main and
Remote Stations would be set to the ON (down) position . This would
cause the program audio heard by the Talent and Announcer to be
interrupted whenever the Director talks to them, but only while the
Director is holding the Talk button.
To Next Page
Loading...
Need help?
General
