Clear-Com WBS-670 - Initial Equipment Set-Up Guide

Initial Equipment Set-Up
Unpacking
Unpack your Clear-Com
®
System. Below are the items that
should come with your base station and each belt pack.
WBS-670
WTR-670
Contact the shipper or your dealer immediately if anything is
damaged or missing.
4-1
Quantity Description
1 WBS-670 Base Station
1 Operating Instructions
1 Power Cord
2 Antennas (one Transmit and one Receive)
1 Warranty Card
1 Screwdriver
1 Warning Card
4 Rubber feet
Quantity Description
1 WTR-670 with Antennas
1 Battery pack
1 Instruction Sheet
1 Screwdriver
1 Warranty Card
Section
4