Clevo E4120 User Manual

Modules & Options
3.75G/HSPA Module 7 - 21
7
1. Turn off the computer, and turn it over and remove the battery (see page 6 - 3).
2. Locate the 3.75G USIM card cover and loosen screw , and then remove the
USIM card cover .
3. Insert the USIM card as you would into your mobile phone.
4. Slide the SIMLOCK towards the hinge in order to release the lock and lift it up.
5. Insert the USIM card as illustrated in (Figure 7 - 18) and close the SIMLOCK.
Figure 7 - 17
USIM Card Cover
Removal

Power Safety
Warning
Before you undertake any
installation procedures,
make sure that you have
turned off the power, and
disconnected all peripher-
als and cables (including
telephone lines). It is advis-
able to also remove your
battery in order to prevent
accidentally turning the ma-
chine on.
Figure 7 - 18
Insert the USIM Card
1
2
1
2

Clevo E4120 Specifications

General

Brand	Clevo
Model	E4120
Category	Laptop
Language	English