Clevo E4120 - Choosing a Profile

Modules & Options
7 - 38 3.75G/HSPA Module
7
Choosing a Profile
If you need to switch stored profiles follow the instructions below:
1. Access the Connection Manager from the Start menu (Connection Manager
), or (Start > Programs/All Programs > BandLuxe > BandLuxe
HSDPA Utility R11 > Connection Manager).
2. Click the Menu > Profile.
3. Highlight the profile required and click Default.
4. Click OK to confirm.
5. YES will be displayed alongside the chosen default profile.
Figure 7 - 34
Choosing a Profile