Modules & Options
3.75G/HSPA Module 7 - 23
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn + key combination (see Table 1 - 4, on
page 1 - 10) to toggle power to the 3.75G/HSPA module.
When the
3.75G/HSPA
module is powered on, the indicator will briefly be displayed. Make sure you in-
stall the drivers in the order indicated in
Table 4 - 1, on page 4 - 3
.
Note that exiting
the application does NOT turn off the 3.75G/HSPA module.
• Mobile Partner - See “Mobile Partner Application Installation” on page 7 -
24 for driver installation information and “Mobile Partner Application” on
page 7 - 25 for instructions on using the Mobile Partner application.
• BandLuxe HSDPA Utility - See “BandLuxe HSDPA Utility Installation” on
page 7 - 31 for driver installation information and “BandLuxe HSDPA - Con-
nection Manager” on page 7 - 32 for instructions on using the BandLuxe
HSDPA Utility.
To Next Page
Loading...
Need help?
General
