Modules & Options
7 - 36 3.75G/HSPA Module
7
4. Click New (button) and input any Network Settings required by your service
provider (all fields may not need to be filled in).
5. The profile name is used to identify your profile if a number of profiles are used.
6. You will need to check with your service provider to confirm if the User Name and
Password are required.
7. You will need to enter the Access Point Name and phone Number as supplied by
the service provider.
8. Click Save to save the profile.
Password
The password can be
any combination of let-
ters and numbers, and
is case sensitive. Check
with your service provid-
er to confirm that a user
name and password are
required.
Figure 7 - 32
Profile Detail
To Next Page
Loading...
Need help?
General
