Modules & Options
3.75G/HSPA Module 7 - 47
7
Network - Network Selection
Edit the network selection settings from this menu. The Standard (auto) setting will
search for networks in the order specified in the Prefer list. Click Standard (auto)
> Next to view and adjust the Prefer list. The Prefer list is displayed at the top of the
screen, and the bottom of the screen lists all available networks. Click Scan to bring
up a list of all available networks.
Click to highlight a network in the Prefer list, and click the up arrow on the left to
move it up the list (to increase its preference); click the down arrow to decrease the
preference. Clicking the red icon removes the highlighted network from the Prefer
list.
In the bottom list, highlight a network and click the up arrow above to move that net-
work to the Prefer list. Click Save (button) to confirm the changes.
Network Setting
Note that the network set-
tings can only be accessed
for editing if the program is
not connected to a network.
Figure 7 - 44
Setting - Network &
Prefer List
To Next Page
Loading...
Need help?
General
