Clevo N650DU Series - Removing the Battery

Disassembly
Removing the Battery 2 - 5
2.Disassembly
Removing the Battery
1. Turn off the computer, turn it over.
2. Slide the latch in the direction of the arrow (Figure 1a
).
3. Slide the latch in the direction of the arrow, and hold it in place (Figure 1a
).
4. Slide the battery in the direction of the arrow and lift it out (Figure 1b
).
5. Make sure the latch is in the unlock position and then slide the battery into the bay in the direction of the arrow
until it locks into position. Make sure both locks are locked after the battery is in the bay (Figure 1c
).
1
2
6
3
4
5

3. Battery
Figure 1
Battery Removal
a. Slide the latch and hold it
in place.
b. Slide the battery out.
c. Slide the battery in.
a.
c.
1
2
b.
3
4
5
3