Clevo N650DU Series - Removing the M.2 SSD Module

Disassembly
Removing the M.2 SSD Module 2 - 21
2.Disassembly
Removing the M.2 SSD Module
1. Turn off the computer, turn it over to remove the battery (page 2 - 5) and bottom cover (page 2 - 6).
2. The M.2 SSD module will be visible at point on the mainboard (Figure 16a).
3. Remove the screw
(Figure 16b)
4. The M.2 SSD module (Figure 16c) will pop-up, and you can remove it from the computer.
5. Reverse the process to install a new module (do not forget to replace all the screws and bottom cover).
1
2
3
b.
c.
a.
2
3
1
3

3.M2 SSD Module
•1 Screw
Figure 16
M.2 SSD Module
Removal
a. Locate the module.
b. Remove the screw.
c. The module will pop up.