Clevo N650DU Series - Removing the Caddy;2 Nd HDD

Disassembly
Removing the Caddy/2nd HDD 2 - 9
2.Disassembly
Removing the Caddy/2nd HDD
Figure 5
Caddy/2nd HDD
Removal
a. Remove the screw.
b. Remove the caddy from
the ODD bay.
c. Remove the screws.
d. Separate the HDD and
connector.
e. Lift the HDD off the cad-
dy.

HDD
Only use 7.0 mm(H)
HDD for the second
HDD/caddy.
1. Turn off the computer, turn it over, and remove the battery (page 2 - 5) and the component bay cover (page 2 - 6).
2. Remove the screw at point , and use a screwdriver to carefully push out the caddy at point .
3. Remove screws - (Figure 5c) to release the hard disk.
4. Separate the hard disk from the connector (Figure 5d).
5. Lift the hard disk out
(Figure 5e).
6. Reverse the process to install a new HDD (do not forget to replace the screws and bottom cover).
7. Restart the computer to allow it to automatically detect the new device.
1
3
2
4
7
8
9
8
b.
a.
2
3
1
e.c. d.
5
8
8
4
67
9

3. Caddy
5. HDD
9. HDD Connector
•5 Screws