EasyManua.ls Logo

Clevo N650DU Series - Page 32

Clevo N650DU Series
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Disassembly
2 - 8 Removing the Hard Disk Drive
2.Disassembly
Hard Disk Size Note (Foam Rubber Insert)
Note that the hard disks pictured on the following pages are all 9.5mm(H) hard disk drives. In some cases 7mm(H) hard
disk drives will be installed. For more information contact your distributor/supplier, and bear in mind your warranty
terms.
Figure 4
Foam Rubber
Insert for 7mm(H)
HDDs
If you are replacing a 9.5mm(H) HDD with a
7mm(H) HDD then insert another foam rub-
ber insert on top of the existing one (as
shown above).
If you are replacing a 7mm(H) HDD with a
9.5mm(H) HDD then remove the upper foam
rubber insert (only the upper insert).

Table of Contents

Related product manuals