Clevo N650DU Series - Page 31

Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
5. Remove the screw from the hard disk assembly (Figure 3d).
6. Slightly lift and pull the hard disk assembly in the direction of arrow (Figure 3e).
7. Lift the hard disk assembly out of the bay (Figure 3f).
8. Remove the screws - and the HDD bracket from the hard disk
(Figure 3g).
9. Reverse the process to install a new hard disk (do not forget to replace all the screws and bottom cover).
8
9
10
11
12
13
14
15
d.
g.
14
15
f.
11
8
10
12
13
e.
9

10. HDD Assembly
14. HDD Bracket
15. HDD
•3 Screws
Figure 3
HDD Assembly
Removal (cont’d.)
d. Remove the screw.
e. Slightly lift and pull the
HDD assembly in the di-
rection of the arrow.
f. Lift the HDD assembly
out of the bay.
g. Remove the screws and
HDD bracket.