Modules & Options
7 - 60 Intel Turbo Memory Module
7
7. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/
DVD drive.
8. Click Option Drivers (button).
9. Click 4.Install TM&iMSM Driver > Yes.
10. Click Next > Yes > Next > Next.
11. Click Finish to restart the computer.
12. For Turbo Memory modules that support User Pinning see “Intel Turbo
Memory Dashboard (User Pinning Supported Only)” on page 7 - 61.
13. For Turbo Memory modules that do not support User Pinning see“Intel
Turbo Memory Console (All Modules)” on page 7 - 64.
If the Turbo Memory module supports User Pinning then the Intel Turbo Memory
Dashboard will be installed. If the Turbo Memory module does not support User
Pinning then the Intel Turbo Memory Dashboard will not be installed.
ReadyBoost Issue
When the Intel® Turbo
Memory Console is
opened immediately after
powering on the system,
Windows ReadyBoost
may appear to be disabled.
This is expected behavior.
The status appears as dis-
abled while Microsoft gen-
erates the Windows
ReadyBoost file. Once the
file has been generated,
the status should appear as
Enabled again.
See the Intel website (ht-
tp://support.intel.com/
support/chipsets/itm/sb/
CS-025852.htm) for the
latest updated information
on this issue.
To Next Page
Loading...
