Windows XP Information
E - 16 NVIDIA Video Driver Controls
E
Display Devices and Modes (NVIDIA)
Besides the built-in LCD you can also use an external monitor/flat panel display/TV
(TV through HDMI-Out port only), connected to the external monitor port or to the
HDMI-Out port (High-Definition Multimedia Interface) as your display device. The
following are the display options:
Table E - 3 - Display Modes
See “HDMI Audio Configuration” on page E - 19 for instructions on configuring
audio when setting up an HDMI display as an external device.
nView Display Mode Description
Single
One of the connected displays is used as the display
device
Clone Both connected displays output the same view
Dualview
Both connected displays are treated as separate
devices, may be configured independently and act
as a virtual desktop (this is similar to Extended
Desktop in Windows)
HDMI Connection
(NVIDIA WinXP)
Note for external dis-
plays connected to the
HDMI-Out port:
If you disconnect the
HDMI cable, and later
reconnect it, you will
then need to go to the
NVIDIA Control Panel
to reconfigure the con-
nected displays in either
Clone/Extended Mode.
To Next Page
Loading...
