BIOS Utilities
5 - 10 Advanced Menu
5
DFOROM (Robson) Support (Advanced Menu > SATA Mode Selection)
This item will only be available if you have selected AHCI in SATA Mode Selec-
tion. The option should be enabled only if you have included an optional Intel Tur-
bo Memory Module in your purchase configuration. You should then install the
driver as per the instructions in “Intel Turbo Memory & Matrix Storage Setup and
Driver Installation” on page 7 - 59.
Legacy USB Support: (Advanced Menu)
Choose “Enabled” if you intend to use USB devices in systems which do not nor-
mally support USB functionality (e.g. DOS). The default setting is “Enabled” and
does not need to be changed if you intend to use your USB devices in Windows.
Boot-time Diagnostic Screen: (Advanced Menu)
Use this menu item to enable/disable the Boot-time Diagnostic Screen.
Legacy OS Boot: (Advanced Menu)
Enable this item to support only system boot from the Legacy OS (e.g Windows Vis-
ta/Windows 7/Windows XP). If disabled the system will attempt to boot from the EFI
(Extensible Firmware Interface) before the Legacy OS.
To Next Page
Loading...
