Windows XP Information
3.75G/HSPA Module E - 51
E
3G Watcher Application Installation
1. Enable power to the module by pressing the Fn + key combination (give the module about 10 sec-
onds to power on - the on screen icon will indicate the module’s power status).
2. If a Found New Hardware window appears, click Cancel in all windows that appear, and then pro-
ceed to install the driver as below.
3. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive.
4. Click Option Drivers (button).
5. Click 3.Install 3G Driver > Yes.
6. Click Next.
7. Click the button to accept the license agreement, and then click Install.
8. When the next screen appears wait (about 2 minutes) until the 3G Watcher application appears on
screen (as per Figure 7 - 12 on page 7 - 20) before clicking Finish (this allows the hardware to detect
the 3.75G/HSPA module).
9. You can access the 3G Watcher application from the Start menu (Start > Programs/All Programs >
Sierra Wireless > 3G Watcher), or by clicking the desktop icon .
10. See “Setting Up a Carrier Profile” on page 7 - 21 and “Connecting to the Service Provider” on
page 7 - 23 for instructions on using the 3G Watcher application.
To Next Page
Loading...
