Upgrading The Computer
Upgrading the Optical (CD/DVD) Device 6 - 7
6
Upgrading the Optical (CD/DVD) Device
1. Turn off the computer, and turn it over and remove the battery.
2. Models A & C:
Locate the RAM & CPU bay cover and remove screws - .
3. Carefully (a fan and cable are attached to the under side of the cover) lift up
the bay cover.
4. Carefully disconnect the fan cable , and remove the cover
.
OR
5. Models B, D, E & F:
Locate the hard disk bay cover and loosen screws & .
6. Remove the hard disk bay cover .
Fan Cable
Make sure you recon-
nect the fan cable
before screwing down
the bay cover.
Figure 6 - 5
Removing the RAM
& CPU Cover
4
1 3
4 5
1
2
3
5
1
3
4
2
Models A & C
Models E & F
Models B & D
21
3
21
3