Clevo W765TUN - Advanced Menu

BIOS Utilities
5 - 8 Advanced Menu
5
Advanced Menu
Advanced Chipset Control (Advanced Menu)
Pressing Enter here will access the sub-menu that allows you to enable/disable the
automatic detection of any attached display (this can be disabled for power saving
purposes).
Figure 5 - 3
Advanced Menu

SATA Mode & eSata
Port
The eSATA port only
supports hot-swapping if
you have selected AHCI
mode in SATA Mode
Selection.
If you have selected IDE
mode, then hot-swap-
ping devices connected
to the eSATA port is not
supported.
Intel Turbo Memory
Select AHCI mode in
Sata Mode Selection if
you have included an In-
tel Turbo Memory
module in your pur-
chase configuration.
Main A
A
dvanced Security Boot Exit
F1 Help  Select Item -/+ Change Values F9 Setup Defaults
Esc Exit  Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Advanced
Select options for
Advanced Chipset
features.
Phoenix SecureCore(tm) Setup Utility
 Advanced Chipset Control
Installed O/S: [Vista / Win 7]
SATA Mode Selection: [AHCI]
DFOROM (Robson) Support: [Enabled]
Legacy USB Support: [Enabled]
Boot-time Diagnostic Screen: [Disabled]
Legacy OS Boot: [Enabled]
Reset Configuration Data: [No]
Power On Boot Beep [Disabled]
Battery Low Alarm Beep [Disabled]
Only available if Windows Vista/Win 7
is selected as the O/S.