Windows XP Information
E - 50 3.75G/HSPA Module
E
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn + key combination (see “Function
Keys/Hot Key Indicators” on page E - 5) to toggle power to the 3.75G/HSPA mod-
ule.
When the
3.75G/HSPA
module is powered on, the indicator will briefly be
displayed. Make sure you install the drivers in the order indicated in
Table 6, on
page E - 34
.
Note that exiting the application does NOT turn off the 3.75G/HSPA
module.
• 3G Watcher - See “3G Watcher Application Installation” on page E - 51 for
driver installation information and “Setting Up a Carrier Profile” on page 7 -
21 for instructions on using the 3G Watcher application.
• HSPA Modem Interface - See “HSPA Modem Interface Installation” on
page E - 52 for driver installation information and “HSPA Modem Interface”
on page 7 - 28 for instructions on using the HSPA Modem Interface.
• Mobile Partner - See “Mobile Partner Application Installation” on page E -
53 for driver installation information and “Mobile Partner Application” on
page 7 - 37 for instructions on using the Mobile Partner application.
3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules
DO NOT
support
system wake up on
3.75G/HSPA modem ac-
tivity.
To Next Page
Loading...
