Windows 7 Information
F - 12 Attaching Other Displays
F
Enabling Clone or Dualview Modes
1. Attach your external display to the DVI-Out Port or HDMI-Out port, and turn it on.
2. Go to NVIDIA Control Panel
(see page
F - 7
).
3. Double-click Display (if the sub-menus are not visible), and then click Set up multiple displays.
4. Any attached display will appear under “1.Select the displays you want to use.”
5. Click the tickbox alongside any display you wish to use.
6.
R
ight-click one of the display icons and click “
Clone....”
(a tick will appear alongside it) to Clone the display or
click to remove the tick to use Dualview mode,
7. Click
Apply > Yes
to save the changes.
Figure F - 7 - Enabling Clone/Extended Modes
To Next Page
Loading...
