Windows 7 Information
F - 52 3.75G/HSPA Module
F
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn + key combination to toggle power to
the 3.75G/HSPA module.
When the
3.75G/HSPA
module is powered on, the indica-
tor will briefly be displayed.
Note that exiting the application does NOT turn
off the 3.75G/HSPA module.
• 3G Watcher - See “3G Watcher Application” on page 7 - 20 for driver installa-
tion information and “Setting Up a Carrier Profile” on page 7 - 21 for instruc-
tions on using the 3G Watcher application.
• HSPA Modem Interface - See “HSPA Modem Interface Installation” on
page 7 - 27 for driver installation information and “HSPA Modem Interface”
on page 7 - 27 for instructions on using the HSPA Modem Interface.
• Mobile Partner - See “Mobile Partner Application Installation” on page 7 -
36 for driver installation information and “Mobile Partner Application” on
page 7 - 37 for instructions on using the Mobile Partner application.
3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules
DO NOT
support
system wake up on
3.75G/HSPA modem ac-
tivity.
To Next Page
Loading...
