Page 50 BB6100 Operating Manual
5.6.2 Mechanical facing head assembly
Before machining and frequently during operation, lubricate the tool head carrier at
the grease fitting. Brush chips from the lead screw frequently to prevent thread
damage. Lightly oil the lead screw.
5.6.3 Tool carrier maintenance
Before operating the boring bar, pump light oil into the oiler in the side of the carrier.
Be careful not to damage the scrapers.
Before storage, lightly oil all parts to prevent rusting.
5.7 Hydraulic power unit and motor
See the HPU manufacturer’s documentation for information about your HPU and its
maintenance.
To Next Page
Loading...
