55
The category to which each event belongs is shown in the brackets following
every event description. The event filter (please refer to 4. Programming
Mobile Lite – SMS Remote Programming for details about the event filter)
will process events according to the categories to which events are assigned.
For example, in the case of “100 – Mobile Lite Emergency (medical)”, “medical”
means the category to which the event “Mobile Lite Emergency” is assigned.
Apart from CID_IP and CSV_IP reporting types, Mobile Lite will report its
current location along with other reports.
Event Codes:
100 – Mobile Lite Emergency (emergency)
When the Active Button of Mobile Lite is pressed (“Help Event” set as
100).
Location info will be sent with event 100.
101 – Personal Emergency (emergency)
When the Active Button of Mobile Lite is pressed (“Help Event” set as
101).
When the Active Button of the learnt-in Fall Sensor, WTR or Panic
Button is pressed, or when the cord of the learnt-in PCU is pulled.
Location info will be sent with event 101.
102 –Fall Detection (emergency)
When a fall is detected from the learnt-in Fall Sensor or the Mobile
Lite.
Location info will be sent with event 102.
120 –Panic (emergency)
When the Active Button of Mobile Lite is pressed (“Help Event” set as
120).
Location info will be sent with event 120.
158 – High Temperature Detected (emergency)
When the ambient temperature detected rises above high
temperature level.
159 – Low Temperature Detected (emergency)
When the ambient temperature detected drops below low
temperature level.
302 – Mobile Lite Low on Battery (status)
When Mobile Lite is low on battery.
To Next Page
Loading...
