57
1101 00 200 = CID data (QXYZ GG CCC)
[X...] and [Y...] are location data.
[X...] includes the longitude coordinate represented as E (for East) or W
(for West) _ degrees. The degree count is always a positive value.
[Y...] includes the latitude coordinate represented as N (for North) or S (for
South) _ degrees. The degree count is always a positive value.
[P0,b:…%,d:…,g:…,t:…,la:…,c:…,by:…] includes the following
information:
- P0 (the parameter will always show a 0).
- b:…% stands for the battery level (100%, 90%, 80%, 70%, 60%, 50%,
40%, 30%, 20%, 10%)
- d:… means if Mobile Pro is placed on the base slot (0 = not placed, 1
= placed)
- g:… stands for the Cellular signal strength (level: 1-5, where 5 =
strongest signal strength and 1 = weakest signal strength)
- t:…stands for the timestamp in UTC when the location was acquired.
- la:…means if it’s last GPS location or current GPS location (0 =
current GPS location, 1 = last GPS location)
- c:… stands for the charging status (0 = not charging, 1 = charging)
- by:…displays if the location data was identified by GPS or Wi-Fi
positioning. (G = GPS, W = Wi-Fi positioning)
To Previous Page
Loading...
