CLIVET WSAN-XIN 21 - Thermostatic Driver Alarms; Inverter LED Status

33
7 - CONTROL
Code Description Type
E101
Faulty low pressure trasducer - dAI1
AUTO
E102
Faulty low pressure temperature probe - dAI2
AUTO
E103
Faulty discharge temperature probe - dAI3 probe
AUTO
E106
Saturation output error
AUTO
E107
MOP alarm AUTO
E108
Signalling of valve max opening AUTO
E110 NO link alarm AUTO
E111
Excessive current draw * Manual
E112
Winding 1 disconnection * Manual
E113 Winding 1 short circuit * Manual
E114
Winding 2 disconnection * Manual
E115
Winding 2 short circuit
* Manual
7.6 ELECTRONIC THERMOSTATIC DRIVER ALARM
A = AUTOMATIC reset
* switch on and off the electronic thermostatic driver
LED INVERTER
The access is riserve to the service centres.
Danger of electrocution.
Led:
ON : normal operating
Slow flashing (ON 1sec. ,OFF 0.5 sec.): stanby compressor stopped
Fast flashing (ON 0.2 sec.,OFF 0.2 sec.): in alarm.