HOW TO LIVESTREAM/RECORD WITH OBS/CLONERALLIANCE
HELPER?
You can use ClonerAlliance Helper together with ClonerAlliance ViewPro to preview/record/livestream videos, or you can
also use OBS Studio, which is a popular open source software for video recording and live streaming.
7.1 Connection Guide of ClonerAlliance ViewPro
1. Connect the video player to IN port on ClonerAlliance ViewPro via an HDMI cable. Note: For AV/VGA/YPbPr source
devices, please use the included MMI cable and connect it to the MMI port on ViewPro. After connections, please use
the signal buttons on the remote or the “Source”button on ViewPro device to select the correct input signal.
2. Connect the USB-A to Micro-B cable between the “To PC”port and the USB port of PC.
3. Plug the power adapter into the power socket and plug the other end into the 12V port of ClonerAlliance ViewPro. Or
install batteries into the device for power supply.
7.2 Install ClonerAlliance Helper or OBS Studio
For Windows users, ClonerAlliance Helper or third party software like OBS, VLC, etc can be used with ClonerAlliance
ViewPro. Please be awared that ClonerAlliance ViewPro doesn’t support Linux or Mac for now.
48
To Next Page
Loading...
