ClonerAlliance ViewPro User Manual
Besides ClonerAlliance Helper, we also offer you a video editing software MP4-Cloner, which enables you to trim, combine,
convert and burn the recorded MP4 files. You can visit Knowledgebase of MP4-Cloner Software for more details. Both
software are totally free for the users of ClonerAlliance ViewPro. After you register ClonerAlliance Helper on your Windows
PC, MP4-Cloner will be automatically registered when you run it.
6.3 Connect ClonerAlliance ViewPro with other devices.
1. Connect the video player to the In port on ClonerAlliance ViewPro via an HDMI cable. Note: For AV/VGA/YPbPr
source devices, please use the included MMI cable and connect it to the MMI port on ViewPro. After connections,
please use the signal buttons on the remote or the“Source”button on ViewPro device to select the correct input signal.
2. Plug the power adapter into the power socket and plug the other end into the 12V port of ClonerAlliance ViewPro. Or
install batteries into the device for power supply.
3. Connect the USB-A to Micro-B cable between the “To PC”port of ClonerAlliance ViewPro and the USB port of PC.
6.3. Connect ClonerAlliance ViewPro with other devices. 39
To Next Page
Loading...
