ClonerAlliance ViewPro - Page 62

ClonerAlliance ViewPro User Manual
2. If the storage device isn
’
t detected, keep it inserted and reboot ClonerAlliance ViewPro.
3. Disconnect the storage device and re-connect until the storage indicator lights up.
Does ClonerAlliance ViewPro work with an over-2TB external hard drive?
Yes, ClonerAlliance ViewPro works with an over-2TB external hard drive(8TB at most).
ClonerAlliance ViewPro works with all formats of USB sticks(NTFS, FAT32, exFat) and external hard drives(MBR and
GPT). FYI. Due to the maximum capacity limitation of FAT32 and NTFS format, if you use an over-2TB external hard drive
and don’t want to partition it, please format it to exFAT, it will work. If you want to use NTFS/FAT32, please partition it
first, it will work.
FYI. The capacity limitation of a USB flash drive/SD card is 512GB. The capacity limitation of an external hard drive is 8TB.
Why does the recorded file split into multiple segments?
Using exFAT/NTFS USB storage devices, the single recorded file will be 16GB at most. Using FAT32 USB storage devices,
the single recorded file will be 4GB at most due to the limitation of FAT32 format.
Once the recorded file size exceeds these limitations accordingly, ClonerAlliance ViewPro will generate a new video file
automatically to continue the record.(If needed, you may use bundled Windows software MP4-Cloner to combine them into
one file easily.)
56