B-7
Operation
GLC 353/503 MC3
Operation panel characteristic curve:
On this panel the values are set, from which the integrated processor selects a
characteristic curve.
Parameter Material Parameter Gas
Steel CO
2
Aluminium/Silicon 82% Ar, 18% CO
2
Aluminium/Magnesium 90% Ar, 5% CO
2
, 5%O
2
Chrome/Nickel 98% Ar, 2% O
2
Programming according Pure Argon
to customer requirements
Selector key Material Selector key Gas
Parameter Wire Operation mode
Wire diameter 0,8 (0.030) Normal 2 buttons
Wire diameter 1,0 (0.039) Normal synergic
Wire diameter 1,2 (0.045) Pulsed synergic
Wire diameter 1,6 (1/16) TIG (DC) "Scratch
Start"
Programming according Electrode
to customer requirements
Selector key Wire Selector key Mode
More details on the operation modes and procedures are in the sections Welding and
Definition.
B1.1 Operating and display elements Power source
To Next Page
Loading...
