Cloos GLC 353 MC3 User Manual

16
GLC 353/503/553 MC3Operating instructions
GLC 353 MC3
GLC 503 MC3
GLC 553 MC3
MIG/MAG Welding Machine OPERATING INSTRUCTIONS
and SPARE PARTS LISTS
PLEASE KEEP SAFELY FOR FUTURE REFERENCE
128/01.01
CARL CLOOS
Schweißtechnik GmbH
Industriestr. • 35708 Haiger
Tel. +49 2773/85-0
Fax. +49 2773/85-275
http://www.cloos.de
info@cloos.de

Cloos GLC 353 MC3 Specifications

General

Brand	Cloos
Model	GLC 353 MC3
Category	Welding System
Language	English

Summary

Operating Instructions

Safety Specifications

Fire Prevention (Explosion)

Measures to prevent fires and explosions during welding operations.

Electrical Danger (Current, Voltage)

Warnings and precautions related to electrical hazards.

General Product Description

Technical Data

Power Supply

Special Safety Devices

Water Cooling Device

General Instructions for Shielded Gas Welding

Special Instructions for Pulsed Arc Welding

Instructions for Welding

Operation

Operating and Display Elements on the Power Source

Operating Elements on the Wire Drive Unit

Welding

Procedure: MIG-MAG Normal 2 Knob Operation

Step-by-step guide for basic MIG/MAG welding with two controls.

Procedure: MIG-MAG Normal Synergic Operation

Guide for synergic MIG/MAG welding using material, gas, and wire diameter selection.

Procedure: MIG-MAG Pulse Synergic

Instructions for pulsed MIG/MAG welding with synergic control.

Procedure: TIG Direct-Current

Steps for performing TIG welding with direct current using the machine.

Procedure: Coated Stick Electrodes

How to use the machine for welding with coated stick electrodes.

Programming

Programming a Weld Procedure Sequence

Detailed guide on how to create and save a custom welding program.

Calling Up a Weld Procedure Sequence

Correct a Weld Procedure Sequence

Faults

Problems During Operation

System Fault Overtemperature

Maintenance

Circuit Diagrams GLC 353/503 MC3

Circuit Diagram CK 98 A

Circuit Diagram CK 98 A with Installation Kit Remote Controller Socket