Need help?Do you have a question about the Cloos qineo PULSE MASTER-Plus and is the answer not in the manual?
General| Power Source Type | Inverter |
|---|---|
| Protection class | IP23 |
| Wire feed speed range | 0.5 - 25 m/min |
| Welding Processes | MIG/MAG, TIG, MMA |
| Cooling | Water-cooled |
| Welding current range | 5 - 500 A |
| Power supply voltage | 3 x 400 V |
| Duty cycle at 40°C | 100% at 300 A, 60% at 500 A |
| Cooling type | Air or water (depending on model) |
Overview of the MASTER-Plus operating panel, its display elements, and controls.
Details the available welding operating modes: 2-cycles, 4-cycles, Super-4-cycles, Spot welding, External.
Explains different welding processes like TIG, Electrode, MIG/MAG, including specific MIG/MAG variants.
Description of additional functions such as Duo Pulse, Clean Start, and Diagnosis.
Explains the operational concepts for 2-cycles, 4-cycles, Super-4-cycles, and Spot welding/Interval modes.
Details how to adjust and configure welding characteristic curves and secondary parameters.
Procedures for saving, loading, managing, and deleting welding jobs.
Loading language files and configuring display, crater, and fine adjustment settings.
Settings for control voltage, reset, cooling water, job continuation, and process monitoring.
Compensation for external circuits, Sense technology, and cooling water monitoring.
Locking functions, access management, user management, PAK transfer, and options.
PC adaptation via Ethernet, activating options, and using activation codes.
To Next Page
