To Next PageTo Next Page
Need help?Do you have a question about the Cloos GLC 503 MC3 and is the answer not in the manual?
General| Power Source Type | Inverter |
|---|---|
| Wire Feed Unit | Integrated |
| Output Current Range | 5 - 500 A |
| Protection Class | IP23 |
| Welding Process | MIG/MAG |
| Rated Input Voltage | 400 V |
| Output Voltage Range | 40 V |
| Duty Cycle | 60% at 500 A |
| Efficiency | 85% |
General safety rules, application scope, and essential precautions for safe operation.
Precautions for personal protection, fire prevention, electrical danger, and pacemaker users.
Overview of machine features, application possibilities, and operational restrictions.
Detailed technical specifications including input, output, dimensions, and noise levels.
Installation guidance and procedures to reduce electromagnetic emissions.
Explanation of controls, operating modes, and step-by-step welding procedures.
Guide to programming weld jobs, including steps, modes, and configuration options.
Troubleshooting common faults, system overtemperature, and error messages.
Schedule for regular maintenance, including daily, monthly, quarterly, and bi-annual checks.
Specific procedures for cleaning dust/dirt and handling coolant and anti-freeze agents.
Description of optional features such as key-operated switch, serial interface, remote controller, and automation interface.
Detailed lists of spare parts for the welding machine and wire drive unit.
Electrical circuit diagrams and illustrations of key components for troubleshooting.
Information on the water cooling device, pump maintenance, and filter cleaning procedures.
List of CLOOS representatives, branches, and subsidiaries worldwide for support.
