Cloos GLC 553 MC3 User Manual

B-23
Programming
GLC 353/503/553 MC3
P Programming
The welding power source MC3 enables to program and save 50 jobs (weld programs). The
values to be programmed depend on the operating mode used.
Once the welding programs are saved, they can be called up using the job number.
The following values are saved
- Material
- Wire diameter
- Gas
- Procedure
- Wire feed speed or output
- Weld voltage or arc length
P1 Operating elements for programming
Display 1 shows the actual
vaue
Display 3 shows the
working step and the
weld procedure
sequence numbe
Display 2 shows the actual
value
Operating modes can
be selected
Key Up increases the
actual value
Key Increments of 10
changes the keys Up
and Down in
increments of 10
Key Down reduces the
actual value
Key Save loads the set value
into the memory
Graphic aid for
programming
P1 Bedienelemente für die Programmierung

Cloos GLC 553 MC3 Specifications

General

Brand	Cloos
Model	GLC 553 MC3
Category	Welding System
Language	English