MAN.234 Rev.6 ENG - Use and maintenance manual S19HD page 100 of 126
If the problem persists, contact the Service.
_________________________________________
Drawback: OPERATIONS ARE SLOW.
Cause: 1. Pump in failure.
2. Insufficient hydraulic oil.
3. Blocked oil filter.
Remedies: 1. Replace hydraulic pump.
1. Hydraulic oil top up.
2. Filter replacement.
If the problem persists, contact the Service.
_________________________________________
Drawback: IMPOSSIBLE TO START THE
ENDOTHERMIC ENGINE.
Causes: 1. Emergency button activated.
2. Battery discharged.
3. Out of fuel.
4. Hydraulic oil level too low.
Remedies: 1. Disable the emergency button.
2. Replace the battery.
3. Refuel.
4. Refill hydraulic oil.
If the problem persists, contact the Service.
_________________________________________
The display (par. 3.3.2) allows to read the machine
operational conditions as well as to detect possible
functional anomalies. Reading the corresponding
possible error code and contacting our Service Cen-
tre, it is possible – at any moment – to detect and
solve the problem.
Contact our Service Centre for any tech-
nical problem which is not identified nor
solved by the aforesaid procedure.
To Next Page
Loading...
