MAN.234 Rev.6 ENG - Use and maintenance manual S19HD page 98 of 126
Picture 88: chassis box.
• the led on the remote connection box
makes two red flashes,
• after 30 seconds, the led becomes fixed
and green, to show that the operating
system is working,
• it automatically hooks up to your free
network;
4. Install on your PC the TeamViewer software
(11
th
version) to connect to the machine sys-
tem, through ID and Password supplied by the
manufacturer;
5. Call C.M.C. Service for technical assistance.
9 Troubleshooting
Any operation requiring interventions on
the components of the machine shall be
carried out by authorized and trained
staff.
Non-authorized staff can’t replace com-
ponents. Many components of the MEWP
have been calibrated: a correct calibration of
these parts (which is possible only in C.M.C.
or in authorized repair shops) is necessary to
ensure the safety of the machine.
Drawback: STABILIZATION CONSENT LIGHT
DOES NOT TURN ON.
Cause: 1. The MEWP aerial part is not in
transport position.
2. The green light does not work.
3. One of the outriggers micro-switches is
not working.
To Next Page
Loading...
