MAN.234 Rev.6 ENG - Use and maintenance manual S19HD page 4 of 126
➔ The manual must be stored on the machine
in a weather-resistant storage location, in
an easily accessible place, in order to be
available for consultation at any time.
➔ This manual (or its copy) must always be
kept in the best possible condition (away
from sunlight).
➔ During the work, a copy shall be hold by
the ground operator in a turret case and
another copy by the basket operator inside
the proper documents case.
➔ In case of loss or deterioration, the re-
placement documentation must be re-
quested to the manufacturer, specifying the
code and the review number of the manual.
0.4 Regulatory references
The machine has been designed, built and test-
ed according to:
o the harmonized European standard EN280
which provides the presumption of con-
formity to Essential Safety Requirements of
the Machinery Directive 2006/42/EC being
Voluntary Technical Standard type C;
o the American standard ANSI/SAIA 92.2.
The stability and overload tests of the machine were
carried out in compliance with what described in
EN280 and ANSI/SAIA A92 suite and they have
been successful.
In addition, the technical safety requirements of the
following international standards have been applied:
To Next Page
Loading...
