MAN.234 Rev.6 ENG - Use and maintenance manual S19HD page 61 of 126
Pay the utmost attention during stabilization:
check that no one is inside the stabilization
area.
➔ Check that the outriggers rest on a non-soft,
solid ground that bears the load indicated on
each stabilizer.
➔ In case of soft ground, use supporting plates.
It is forbidden to place the outriggers on
ground roughness: they could be damaged.
➔ Level the machine in order to let the MEWP
operate on a horizontal plane: max frame incli-
nation 1° - max slope which can be assimilated
by the ground 3°.
4.7.4 During the entrance in the basket
It is absolutely forbidden to use the equip-
ment with loads different from those indicat-
ed on the diagram or for uses which are not
allowed;
Do not overload the MEWP;
➔ During the different working operations, the
use of the safety belts is compulsory. Do not
fasten the safety belts to external structures but
only to the supplied grips placed in the basket;
➔ Make sure that the bar lifted to enter the bas-
ket, has returned in its lock position.
4.7.5 During the use of the MEWP
➔ In any dangerous or irregular conditions, stop
the machine by using the emergency button.
Before restarting the machine, check that the
dangerous conditions are over;
It is strictly forbidden to level the basket
when the machine is in working position;
Do not operate when the MEWP is in failure;
It is forbidden to use the “platform control
(emergency) position” when there are opera-
tors inside the basket, unless there is emer-
To Next Page
Loading...
