MAN.234 Rev.6 ENG - Use and maintenance manual S19HD page 68 of 126
The manufacturer declares that the aerial platforms
have been tested according to the parameters of the
European standard 2000/14/CE, indicating a guar-
anteed sound power level shown on the CE Decla-
ration of Conformity of the machine. During the
phases of use of the machine for aerial operations,
this value is further reduced due to the use of bas-
ket away from the source of main noise.
The values of the vibrations transmitted to the oper-
ator both via the controls and directly from the bas-
ket floor are lower than the maximum allowed limits
of 0.5 m/s
2
.
5 Decals
On the machine there are the following decals.
➔ Before using the MEWP, it is compulsory to
check the presence and the perfect reada-
bility of these decals. In case of their ab-
sence or decay, contact the Service.
Picture 31: identification plate (fac-simile).
To Next Page
Loading...
