MAN.234 Rev.6 ENG - Use and maintenance manual S19HD page 6 of 126
1 Description and
scope
1.1 Machine definition
The machine is called S19HD PRO and it is a
mobile elevating work platform (MEWP):
• machine/device intended for moving persons,
tools and material to working positions, con-
sisting of at least a work platform with controls,
an extending structure and a chassis
(ANSI/SAIA 92.20 par. 3);
• mobile machine intended to move persons to
working positions, where they are carrying out
work from the work platform, with the intention
that persons are getting on and off the MEWP
only at access positions at ground level or on
the chassis and which consists as a minimum
of a work platform with controls, an extending
structure and a chassis (EN 280 par. 3.1).
It is forbidden to use the MEWP with
methods and/or conditions other than
those specified and approved by the
manufacturer.
1.2 Machine purpose
The MEWP S19HD PRO is a machine which ena-
bles the operators to reach the working place when
this is high-positioned.
The machine has been designed for an essentially
vertical use. It must be transported only when it is
totally folded in the transport position.
➔ The use of the machine is allowed only to
professional staff, properly trained and
specialized.
1.3 CE certification
C.M.C. s.r.l. states under its own responsibility that
S19HD PRO was designed and produced in com-
pliance with national and European standards, and
that the machine is identical to the model submitted
to control and test for the “CE certification” by the
Notified Institute nr. 1878 - VERICERT s.r.l. - via L.
Masotti, 5 – 48124 Ravenna – Italy.
A copy of the CE Certificate is attached to the man-
ual.
To Next Page
Loading...
