CMC S19HD - Page 90

MAN.234 Rev.6 ENG - Use and maintenance manual S19HD page 88 of 126
Check that the elec-
trical contacts are
not slacken.
Reset connec-
tions.
USER/
C.M.C.
Check that there is no
trace of clashes on
the equipment.
It is
strictly forbidden
to use the
MEWP. Contact
the Service.
C.M.C.
8.2 Weekly maintenance (or eve-
ry 40 hours)
Operations
If negative
result:
by
Check the absence of
splits, cracks, rust on
the MEWP counter
frame (use torches or
lamps to inspect the
internal part under the
frame).
It is
strictly forbid-
den to use
the MEWP.
Contact the
Service.
C.M.C.
Check the cleanliness
of the endothermic
engine and auxiliary
Replacement.
USER/
C.M.C.
motor* air filters.
Check the cleanliness
of the hydraulic fil-
ters.
Replacement.
USER/
C.M.C.
8.3 Monthly maintenance (or
every 120 hours)
Operations
by
Grease the pins and movable
parts.
USER /
C.M.C.
Wash the equipment.
USER /
C.M.C.
Check the tightening of the slew-
ing ring, gear motor and frame
bolts.
USER /
C.M.C.