MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 28 of 138
Picture 14: start/link button on radio control.
2. If the radio control is not correctly connected to
the machine, the message in Picture 15 will
appear on the display; in addition, the green led
on the underside of the display flashes
intermittently and a buzzer on the electric box
emits an intermittent acoustic signal.
Picture 15: no link message on
radio control display.
3. Press the Start/Link button again: when the connection
is complete, the buzzer stops and the green led starts to
light up at the rate of two flashes interspersed with a
pause.
To Next Page
Loading...
