MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 4 of 138
➔ The manual must be stored on the machine in
a weather-resistant storage location, in an
easily accessible place, in order to be
available for consultation at any time.
➔ This manual (or its copy) must always be kept
in the best possible condition (away from
sunlight).
➔ During the work, a copy shall be hold by the
ground operator in a turret case and another
copy by the basket operator inside the proper
documents case.
➔ In case of loss or deterioration, the
replacement documentation must be
requested to the manufacturer, specifying the
code and the review number of the manual.
0.4 Legislative references
The machine has been designed, built and tested
according to:
o the harmonized European standard EN280
which provides the presumption of conformity
to Essential Safety Requirements of the
Machinery Directive 2006/42/EC being
Voluntary Technical Standard - type C;
o the American standard ANSI/SAIA A92.20.
The stability and overload tests of the machine were
carried out in compliance with what described in
EN280 and ANSI/SAIA A92 suite and they have been
successful.
In addition, the technical safety requirements of the
following international standards have been applied:
To Next Page
Loading...
Need help?
General
