EasyManua.ls Logo

CMC S28 - Page 77

CMC S28
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 75 of 138
Do not use clothes with hanging flaps, scarves, ties
or any other accessory which could be dragged
into the moving parts; inform about the closest
fire-extinguishers and first-aid kit.
4.7.3 During the positioning of the MEWP
It is forbidden to operate in situations which are
dangerous for the safety of people;
Do not operate in explosion hazard areas;
Block the vehicle by the parking brake and, in
sloping roads, block the wheel with wedges;
Check that the working area is suitable to the MEWP
performances and operations, and that it is enough
lit;
Check that the operational stands and the working
area are enough lit and well visible;
If operating in closed or little aired environment,
ensure, before starting the vehicle engine, that his
has appropriate ventilation or convey exhaust gases
outside:
Exhaust emissions produced by the MEWP engine
are toxic;
Appropriately define the working area through
suitable signs; observe the laws in force about the
traffic, in case you use the MEWP where road
circulation is allowed;
Check that nobody is within the MEWP action range.
Stabilize the truck through the outriggers.
Pay the utmost attention during stabilization: check
that no one is inside the stabilization area.
Check that the outriggers rest on a non-soft, solid
ground that bears the load indicated on each
stabilizer.
In case of soft ground, use supporting plates.
It is forbidden to place the outriggers on ground
roughness: they could be damaged.
Level the vehicle in order to let the MEWP operate
on a horizontal plane: max frame fall 1° - max slope
which can be assimilated by the ground 3°.

Related product manuals