21
The Accutrend Plus instrument
A
Display
Shows measurement results, information,
symbols and all stored measured results.
B
M button (memory)
By pressing this button, you can retrieve all
stored values and (together with the Set button)
you can change the instrument settings.
C
On/Off button
By pressing this button, you power the
instrument on and off.
D
Measurement chamber flap
To apply the sample, open this flap. To start the
measurement, close the flap.
E
Test strip guide
Insert the test strip here.
F
Set button
By pressing this button, you access the various
instrument settings which are changed using
the M button. You also use this button to switch
between the different test parameters to show
the currently stored code numbers (before
measurement), or to review results (when in
memory mode).
To Next Page
Loading...
Need help?
General